Description

We are supplier & trader of Digimatic Indicator with Signal Output Function Type.

Features:-

• With max./min. value holding function model of the ID-C Series Digimatic Indicators.
• The maximum, minimum, or runout value can be displayed during measurement.
• GO/±NG judgment is performed by setting the upper and lower tolerances for max., min. and runout values.
• High speed sampling ratio of 50 times/s.
• Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle “Absolute Position” from the origin at power-on.

Technical Data:-

• Accuracy: Refer to the list of specifications.
• Resolution: 0.001mm, .00005”/0.001mm or .0001”/0.001mm
• Display: LCD
• Length standard: ABSOLUTE electrostatic capacitance type linear encoder

• Max. response speed: Unlimited
• The end of the main scale is hook-shaped to allow depth and thickness measurements of a projected portion or
• lip in a hole, in addition to standard depth measurement
• With fine adjustment models are available.
• Optional wider extension base are available.Measuring force: 1.5N or less
• Battery: SR44 (2 pcs.), 938882
• Battery life: Approx. 800 – 1300 hours under normal use
• Dust/Water protection level: IP42

Function

• Origin-set/Preset, Zeroset, GO/±NG judgment, Max/Min/Runout value holding, Counting direction switching, Power
• ON/OFF, Data output,inch/mm conversion (on inch/metric models only)
• Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error